|
Digital Frame Recorder, Model 6139, provides the means to digitize store and play back up to 256 frames of NTSC or RS-170 video, or optionally PAL/CCIR video (Model 6139A). The stored video resolution is 800 pixels horizontally and 480 lines vertically. The digitization is performed with a sample rate of 15MHz by 9 bits. The unit can record video in real time or at periods of 0.1, 0.2, 0.5 or 1.0 seconds, as selected by the operator. Functions include: Record, Play, Stop, Go to End, Go to Beginning, Step Forward, Step Reverse and Time Lapse Recording. The unit may be operated as a stand-alone device, with all control, except for the time lapse selection, via an RS-232 port. The 6139 is housed in a 19 inch wide rack mountable enclosure, 3.5 inches high by 8.5 inches deep. It is powered by 115VAC 50/60 Hz. |
| Digital Field Recorder, Model 6149, is identical to the 6139
except that it records successive video fields rather than frames,
which is desirable when time/event analysis is required. A total of 512
fields can be recorded with a stored video resolution of 800 pixels
horizontally and 240 lines vertically. As in the 6139, the digitization
is performed with a sample rate of 15MHz by 9 bits and the unit can
record video in real time or at periods of 0.1, 0.2, 0.5 or 1.0
seconds, as selected by the operator.
|
DFR Remote Control, Model 6153, provides full remote control of all panel controls on the 6149 Digital Field Recorder, except Time Lapse. Additionally the 6153 provides shuttle and jog control. Interface to DFR is via RS-232 port.
|
|
Copyright © 2007, Instrumentation Technology Systems |
